| Title | ELASTIČNA STABILNOST PRAVOKUTNIH PLOČA S I BEZ OTVORA DJELOVANJEM RUBNIH TLAČNIH NAPREZANJA |
| Author | Marinko Vujčić |
| Mentor(s) | Ivica Guljaš (thesis advisor)
|
| Abstract | U ovom radu se radilo na izračunavanju elastične stabilnosti ploče s i bez otvora pri
različitm uvjetima oslanjanja i različitim omjerima dimenzija ploče. Korišteni omjeri ploče
kreću se od 1 do 3.5, a išlo se korakom od 0.25. Oslonci ploče varirani su izmežu slobodno
oslonjenih i pridržanih. Primjenjeni otvori su kvadratni, okrugli, dijamantni i heksagonalni, a
oni su varirani u 3 veličine i 3 lokacije na ploči. Na temelju dobivenih rezultata nastojat će se
ustvrdit optimalni oblik, lokacija i veličina otvora. |
| Keywords | Eeastic stability of rectangular thin plate with openings elastic stability of rectangular panels by edge compression stress elastic stability dimensional variation aperture variation in size and shape |
| Parallel title (English) | ELASTIC STABILITY OF RECTANGULAR PLATES WITH AND WITHOUT OPENINGS UNDER THE EDGE COMPRESSIVE STRESS |
| Committee Members | Ivica Guljaš (committee chairperson)
Goran Gazić (committee member)
Davorin Penava (committee member)
|
| Granter | Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek |
| Lower level organizational units | Department for Technical Mechanics |
| Place | Osijek |
| State | Croatia |
| Scientific field, discipline, subdiscipline | TECHNICAL SCIENCES
Basic Technical Sciences
Technical Mechanics (Mechanics of Rigid and Deformable Bodies)
|
| Study programme type | university |
| Study level | graduate |
| Study programme | University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering |
| Study specialization | Hydraulic engineering |
| Academic title abbreviation | mag.ing.aedif. |
| Genre | master's thesis |
| Language | Croatian |
| Defense date | 2018-09-26 |
| Parallel abstract (English) | This paper deals with the calculation of the elastic stability of the slab with and
without openings under different load conditions and different dimensions of the plate
dimensions. The ratio of the plates used ranged from 1 to 3.5, with a step of 0.25. The plate
bases were varied between hinged and fixed. Applied openings are square, round, diamond
and hexagonal, and they are varied in 3 sizes and 3 locations on the plate. Based on the
obtained results, the optimum shape, location and size will be strengthened |
| Parallel keywords (Croatian) | elastična stabilnost pravokutnih tankih ploča s otvorima elastična stabilnost pravokutnih ploča djelovanjem rubnih tlačnih naprezanja elastična stabilnost dimenzijske varijacije varijacije otvora u veličini i obliku |
| Resource type | text |
| Access condition | Access restricted to students and staff of home institution |
| Terms of use |  |
| URN:NBN | https://urn.nsk.hr/urn:nbn:hr:133:064380 |
