prikaz prve stranice dokumenta Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija
Access restricted to students and staff of home institution
undergraduate thesis
Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija
2022. urn:nbn:hr:133:305850
Blažičević, Marina
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Materials and Structures

Cite this document

Blažičević, M. (2022). Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:305850

Blažičević, Marina. "Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:305850

Blažičević, Marina. "Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:133:305850

Blažičević, M. (2022). 'Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 13 September 2023, https://urn.nsk.hr/urn:nbn:hr:133:305850

Blažičević M. Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2022 [cited 2023 September 13] Available at: https://urn.nsk.hr/urn:nbn:hr:133:305850

M. Blažičević, "Aksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:133:305850

Please login to the repository to save this object to your list.
Metadata
TitleAksonometrijski prikaz armaturnih koševa elemenata armiranobetonskih konstrukcija
Title (english)Axonometric representations of reinforcement cages of elements of rc structures
AuthorMarina Blažičević
MentorIvan Kraus (mentor)
Committee memberDamir Varevac (predsjednik povjerenstva)
Committee memberIvan Kraus (član povjerenstva)
Committee memberMarijana Hadzima-Nyarko (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Materials and Structures)
Osijek
Defense date and country2022-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Kroz ovaj rad opisani su armaturni koševi konstrukcijskih elemenata. Obrađeno je 10 konstrukcijskih elemenata, od čega pet temeljnih greda, jedna podna ploča i četiri stupa. Osnovne informacije o građevini, koji čine obrađeni elementi, navedene su u uvodu. Također, u uvodu su navedene osnovne informacije o armaturi, poput oblika, razreda, u kojem projektu je i kako potrebno prikazati nacrte armature, te što je aksonometrija. U glavnom djelu rada, opisane su uzdužne armaturne šipke, konstruktivna armatura, spone i armaturne mreže od kojih su napravljeni armaturni koševi. Opisani su profili, tj. promjeri armaturnih šipki korišteni za izradu uzdužne, razdjelne i poprečne armature te spona. Opisano je na kojem se razmaku postavljaju spone, te postoji li preklop armaturnih šipki i koliko on iznosi ako postoji. Također dana je definicija zaštitnog sloja betona, objašnjeno je zašto je on važan i koliko iznosi za svaki element. Za svaki obrađeni element, u prilozima, prikazana je aksonometrija pripadajućeg armaturnog koša, te iskaz armature koja je utrošena za izradu koša. Uz sve navedeno, prikazane su i slike armaturnih koševa snimljenih na gradilištu. Zaključak daje informacije o najviše korištenom razredu armature, promjeru armaturnih šipki, razmaku spona i najčešćoj debljini zaštitnog sloja betona.
Abstract (english)
This paper describes the reinforcing cages of structural elements. 10 structural elements were processed, of which five foundation beams, one floor slab and four columns. Basic information about the building, which consists of processed elements, is listed in the introduction. Also, the introduction provides basic information about reinforcement, such as shape, class, in which project and how it is necessary to display reinforcement drawings, and what axonometry is. In the main part of the work, the longitudinal reinforcing bars, structural reinforcement, ties and reinforcing mesh from which the reinforcing baskets are made are described. The profiles, i.e. the diameters of reinforcing bars used for the production of longitudinal, dividing and transverse reinforcement and ties, are described. It is described at what distance the ties are placed, and whether there is an overlap of reinforcing bars and how much it amounts to if there is one. The definition of the protective layer of concrete is also given, it is explained why it is important and how much it amounts to for each element. For each treated element, in the attachments, the axonometry of the associated reinforcement basket is shown, as well as a statement of the reinforcement used to make the basket. In addition to all of the above, pictures of rebar baskets taken at the construction site are also shown. The conclusion provides information about the most used class of reinforcement, the diameter of reinforcing bars, the spacing of ties and the most common thickness of the concrete protective layer.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:133:305850
Study programmeTitle: Undergraduate university programme in civil engineering; specializations in: General course
Course: General course
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-11-07 12:15:46