prikaz prve stranice dokumenta ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA
Access restricted to students and staff of home institution
master's thesis
ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA
2016. urn:nbn:hr:133:615961
Šimić Jelić, Matija
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Department for Organization, Technology and Management
Chair of Construction Management and Technology

Cite this document

Šimić Jelić, M. (2016). ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:133:615961

Šimić Jelić, Matija. "ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:133:615961

Šimić Jelić, Matija. "ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:133:615961

Šimić Jelić, M. (2016). 'ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, accessed 22 September 2022, https://urn.nsk.hr/urn:nbn:hr:133:615961

Šimić Jelić M. ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek; 2016 [cited 2022 September 22] Available at: https://urn.nsk.hr/urn:nbn:hr:133:615961

M. Šimić Jelić, "ANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Osijek, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:133:615961

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA TEHNOLOŠKOG PROCESA KOD IZVOĐENJA GORNJEG USTROJA PROMETNICA
Title (english)ANALYSIS OF THE TECHNOLOGICAL PROCESS DURING EXECUTION OF ROAD OVERHEAD
AuthorMatija Šimić Jelić
MentorZlata Dolaček-Alduk (mentor)
Committee memberSanja Dimter (predsjednik povjerenstva)
Committee memberZlata Dolaček-Alduk (član povjerenstva)
Committee memberIvana Barišić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
(Department for Organization, Technology and Management)
(Chair of Construction Management and Technology)
Osijek
Defense date and country2016-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Construction Organization and Technology
Abstract
U diplomskom radu analiziran je tehnološki proces izvođenja gornjeg ustroja prometnica. Definirani su, objašnjeni i primjerima potkrijepljeni ključni pojmovi potrebni za razumijevanje ove tematike, a zatim se sadržaj ovog diplomskog rada bavio isključivo gornjim ustrojem ceste. Svaki sloj gornjeg ustroja obrađen je istim principom: općenite karakteristike sloja, materijali koji se koriste u sloju, proizvodnja materijala te prijevoz i ugradnja materijala odgovarajućim strojevima. Izvođenje svakog sloja prikazano je kartom procesa i dijagramom toka. Na kraju diplomskog rada nalazi se tablica u kojoj je pregled svih slojeva i njihovih najbitnijih karakteristika i dijagram toka referiran na tablicu.
Abstract (english)
The thesis analyzed the technological process of execution of the overhead roads. Key concepts for the understanding of this topic are defined, explained and supported by examples. Afterward, the content of this thesis dealt exclusively about execution of the overhead roads. Each layer of the overhead roads is processed in the same principle: the general characteristics of the layer, materials used in the layer, the production of the materials, transportation and integration materials with compatible construction machinery. Execution of each layer is shown with process chart and flow diagram. At the end of the thesis is a table which gives an overview of all the layers and their most important characteristics and flow diagram referenced at the table.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:133:615961
Study programmeTitle: University graduate study in civil engineering; specializations in: Hydraulic engineering, Supporting structures, Construction management and technology, Transportation engineering
Course: Construction management and technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-11-02 14:03:16