prikaz prve stranice dokumenta A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions
  Preuzmi
PDF 1.06 MB
Znanstveni rad - Izvorni znanstveni rad
A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions
Construction and building materials, 355 (2022); 129167. https://doi.org/10.1016/j.conbuildmat.2022.129167
Danielsson, Henrik; Jeleč, Mario

Citirajte ovaj rad

Danielsson, H. i Jeleč, M. (2022). A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions. Construction and building materials, 355.. doi: 10.1016/j.conbuildmat.2022.129167

Danielsson, Henrik i Mario Jeleč. "A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions." Construction and building materials, vol. 355, 2022. https://doi.org/10.1016/j.conbuildmat.2022.129167

Danielsson, Henrik i Mario Jeleč. "A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions." Construction and building materials 355 (2022). https://doi.org/10.1016/j.conbuildmat.2022.129167

Danielsson, H. i Jeleč, M. (2022) 'A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions', Construction and building materials, 355. doi: 10.1016/j.conbuildmat.2022.129167

Danielsson H, Jeleč M. A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions. Construction and building materials [Internet]. 2022. [pristupljeno 21.12.2024.];355. doi: 10.1016/j.conbuildmat.2022.129167

H. Danielsson i M. Jeleč, "A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions", Construction and building materials, vol. 355, 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:133:504340. [Citirano: 21.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:133:504340
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)A unified design proposal for shear stress prediction in crossing areas for cross laminated timber at in-plane shear and beam loading conditions
AutorHenrik Danielsson
AutorMario Jeleč
Autorova ustanovaSveučilište Josipa Jurja Strossmayera u Osijeku
Građevinski i arhitektonski fakultet Osijek
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
Environmental and urbanization challenges during the last few decades encouraged steady growth of mass timber construction where attention is drawn to cross laminated timber (CLT) as one of the most interesting products in terms of mechanical properties, versatility, efficient prefabrication and sustainability. Standardisation and codification regarding testing and design of CLT elements are hence pointed out as one of the main issues within the ongoing revision procedure of Eurocode 5. A consistent and unified design approach for CLT at pure in-plane shear loading conditions (shear walls) and at in-plane beam loading conditions is however still missing. This paper deals with analytical models for the determination of stress components related to pre- dictions of load bearing capacity of CLT with respect to shear failure mode III – shear failure in the crossing areas constituted by the flatwise bonded areas between laminations of adjacent layers. This failure mode is relevant for both pure in-plane shear loading and in-plane beam loading conditions. The paper presents a review of previously proposed models for the prediction of shear stresses in crossing areas of CLT, for both loading conditions. Comparisons between FE-results and model predictions are reviewed indicating significant differences between them concerning the predicted influence of the CLT element lay-up and values of maximum shear stresses. Based on simplifications of models previously presented, a unified design proposal that is based on a rational and consistent mechanical background for both loading situations and that shows overall good agreement with FE-results is presented.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaConstruction and building materials
Brojčani podacivol. 355, 129167
p-ISSN0950-0618
e-ISSN1879-0526
DOIhttps://doi.org/10.1016/j.conbuildmat.2022.129167
URN:NBNurn:nbn:hr:133:504340
Datum objave publikacije2022
URL dokumentahttps://www.sciencedirect.com/science/article/pii/S0950061822028239
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje-Nekomercijalno-Bez prerada 4.0 međunarodna (CC BY-NC-ND 4.0)
Datum i vrijeme pohrane2024-12-12 12:51:47