prikaz prve stranice dokumenta Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles
  Download
PDF 2.97 MB
Scientific paper - Original scientific paper
Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles
Materials, 13 (2020), 10; 1-17. https://doi.org/10.3390/ma13102364
Netinger Grubeša, Ivanka; Vračević, Martina; Ranogajec, Jonjaua; Vučević, Snežana

Cite this document

Netinger Grubeša, I., Vračević, M., Ranogajec, J. & Vučević, S. (2020). Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles. Materials, 13. (10), 1-17. doi: 10.3390/ma13102364

Netinger Grubeša, Ivanka, et al. "Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles." Materials, vol. 13, no. 10, 2020, pp. 1-17. https://doi.org/10.3390/ma13102364

Netinger Grubeša, Ivanka, Martina Vračević, Jonjaua Ranogajec and Snežana Vučević. "Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles." Materials 13, no. 10 (2020): 1-17. https://doi.org/10.3390/ma13102364

Netinger Grubeša, I., et al. (2020) 'Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles', Materials, 13(10), pp. 1-17. doi: 10.3390/ma13102364

Netinger Grubeša I, Vračević M, Ranogajec J, Vučević S. Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles. Materials [Internet]. 2020 [cited 2024 December 18];13(10):1-17. doi: 10.3390/ma13102364

I. Netinger Grubeša, M. Vračević, J. Ranogajec and S. Vučević, "Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles", Materials, vol. 13, no. 10, pp. 1-17, 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:133:726457. [Accessed: 18 December 2024]

Please login to the repository to save this object to your list.
Metadata
Title (english)Influence of Pore-Size Distribution on the Resistance of Clay Brick to Freeze–Thaw Cycles
AuthorIvanka Netinger Grubeša
AuthorMartina Vračević
AuthorJonjaua Ranogajec
AuthorSnežana Vučević
Author's institutionJosip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract (english)
This study examines the influence of raw material characteristics, methods of shaping and of parameters of firing process of clay bricks, on pore-size distribution and on resistance to freeze– thaw cycles (with particular emphasis on the retention time of the specimens at the maximum achieved temperature). Pore-size distribution was measured by mercury-intrusion porosimetry, while the resistance to freeze–thaw cycles was assessed by exposing the bricks to freeze–thaw cycles (HRN B.D8.011 standard) monitoring the appearance of surface changes, decrease of compressive strength as well as the Maage factor. A correlation was set up between the Maage factor and the ratio of the compressive strength before and after freezing as a quantitative indicator of bricks resistance to frost. By using this correlation for all the examined bricks, regardless of their raw material and shaping procedure, a low coefficient of correlation (R2 = 0.26) was obtained. When processed separately, machine- made bricks had a significantly higher correlation coefficient value (R2 = 0.60) than the hand-made bricks (R2 = 0.28).
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMaterials
Numberingvol. 13, no. 10, pp. 1-17
p-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma13102364
URN:NBNurn:nbn:hr:133:726457
Publication2020
Document URLhttps://www.mdpi.com/1996-1944/13/10/2364
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-12-04 07:09:30